Paya Lebar Central

Parameters

Requirements

Building Form & Massing

Building Form

The overall building form and massing of individual buildings is to consider how the building will be viewed, as well as impact views from major approaches, key open spaces and the pedestrian mall.

The design of the building form and massing, together with the architectural treatment, is to consider the scale, form and architectural expression of the surrounding buildings, and be designed to create engaging and varied public spaces along the pedestrian mall. Wall-like developments should be avoided.

Building Facades

The building façades of the development fronting all main roads and major public spaces are to be treated as main elevations.

The building facades of the development are to be well-articulated with solid (walls) / void (fenestration) areas that draw upon a combination of different materials (e.g. concrete, brick, steel, glass, greenery, etc.).

To create visual interest and to further break down the building mass, elements of tropical architecture such as sky terraces, balconies, sun-shading louvers, deep recesses, window ledges, roof terraces, communal planter boxes and vertical green walls are to be provided as part of the development and integrated with the overall building form and architectural treatment of the development.

Relevant Circulars:

• Sensitive Design and Development: An Industry Guide of Good Practices to minimize Wall-Like Development

Building Height

Different building heights are specified to respond to the context and to reinforce the character of the district. In general, the overall building height gradually terraces towards the low-rise Geylang Serai Market.

Selected developments may be subject to site-specific building height controls, which will take precedence over technical height controls, whichever is lower.

Building Setback and Building Edge

Last updated: 20 Nov 2020

Developments shall comply with the setback requirements in accordance with the prevailing Development Control guidelines. Selected developments may also be subject to site-specific setback controls, which will take precedence over prevailing DC guidelines.

To create a well-defined urban edge character for Paya Lebar Central, developments are to provide a minimum 2 or 4-storey high building edge abutting the building setback lines along the major arterial roads – Paya Lebar Road, Sims Avenue and Geylang Road.

Up to 40% of the length of the building façade, between the corners of the development, can be set back for articulation of the building form.

Roofscape and Screening

The roof areas are to be considered as the “fifth” elevation and designed to complement the overall form, massing and architectural treatment of each development. The roofs can be designed to be usable outdoor spaces.

Screening Requirements

To ensure that the roof areas are well-designed and attractive when viewed from the surrounding developments, all service areas, mechanical and electrical (M&E) equipment, water tanks, etc., are to be located within and fully integrated into the building envelope and be visually well-screened from the top and all sides of the development.

The performance requirements for the screening of roof-top services are as follows:

1. To be screened from the top and on all sides;
2. The spacing between the trellis or louver elements is to be equal to or less than their depth;
3. The screening elements are to be orientated to cut off views from the street level and surrounding buildings.

Relevant Circulars:

• Screening of Mechanical and Electrical Services and Car Parks
  

Night Lighting

Good night lighting can enhance the nightscape and district character. The night lighting scheme should bring out the key architectural features of the building form, crown, facades, gardens and landscaped areas.

Signage

All developments shall comply with LTA’s signage and wayfinding requirements for Paya Lebar Central, and submit the signage layout and design to the relevant Authorities for detailed evaluation and approval before Temporary Occupation Permit (TOP) can be issued.

Public Space

Appendix 2: UD Guide Plan -1^st Storey Pedestrian Network & Activity Generating Uses

Last updated: 3 June 2022

It is important to provide public spaces within private developments for users to enjoy.

Selected developments are required to provide public spaces within the development site. These may be well-landscaped open spaces, or covered public spaces that provide a high degree of visual and physical porosity through the building.

Public spaces are to be publicly accessible at all times. They are to be connected to the key pedestrian routes at the 1st storey (such as open and covered walkways, through-block links, pedestrian malls and promenades), and, where applicable, designed to be well-integrated and easily accessible from the underground and elevated pedestrian networks within the development.

The design of these public spaces shall comply with the Design Guidelines for Privately Owned Public Spaces (POPS).

Relevant Circulars:

• Update to the Design Guidelines for Privately Owned Public Spaces (POPS)

Uses at the 1^st and 2^nd Storey Levels

Appendix 2: UD Guide Plan -1^st Storey Pedestrian Network & Activity Generating Uses

To create vibrant precincts, as well as attractive and pedestrian-friendly streets, activity-generating uses (AGU) such as retail, food & beverage, and other active uses are to be provided at the following locations:

• The 1st storey of developments fronting pedestrian malls, key streets and public spaces.

For more information on AGUs, please refer to the Development Control Handbook.

Outdoor Refreshment Areas

Where allowed, Outdoor Refreshment Areas (ORA), i.e. outdoor dining areas, can be considered within the public areas or open spaces within private development sites. The scale and design of the ORA and its structures (if any) are to complement the adjacent building. They can only be considered as an extension of an adjoining indoor F&B unit and are for seating only.

If provided, the Gross Floor Area (GFA) for the ORAs are to be computed as part of the maximum permissible GFA for the development and subject to the prevailing Development Control Guidelines under the Planning Act.

Developers are encouraged to incorporate spaces for ORAs at the design stage. The ORAs are to be clearly defined to prevent encroachment onto the adjacent pedestrian thoroughfares e.g. through the use of different floor finishes or planters, etc.

Pedestrian Network

Appendix 2: UD Guide Plan -1^st Storey Pedestrian Network & Activity Generating Uses

Appendix 3: UD Guide Plan -Elevated Pedestrian Network

Paya Lebar Central is planned as a pedestrian-friendly area with a comprehensive sheltered network of pedestrian malls, covered walkways, 2^nd storey links, and through-block links. This network provides convenient, comfortable, and seamless connections between developments, transport facilities, key spaces and attractions, and ensures all-weather comfort.

At-Grade Pedestrian Network

The at-grade pedestrian network is augmented by covered walkways that provide all-weather protected pedestrian routes. All developments are required to provide covered walkways at the 1st storey along the site boundaries / lines of Road Reserves or the designated setback lines. The covered walkways function as public amenities. They are to be kept free of obstruction at all times. In exchange, the area is exempted from GFA computation.

To maintain a distinct precinct character, all covered and open walkways are to be predominantly finished with a warm (yellowish-beige) colour tone, natural stone looking paving material, unless otherwise specified.

Through-Block Links

Selected developments are required to provide through-block links to break down the scale and improve permeability of the streetblock.

Covered walkways and linkways, as well as through-block links may be exempted from GFA computation if they form part of the larger pedestrian network. Specific design requirements have been imposed on some key sites, depending on the locations of these through-block links.

Elevated Pedestrian Network (EPN)

The EPN, also known as Serai Link, complements the at-grade pedestrian network to provide seamless connectivity between developments and the existing Paya Lebar MRT interchange station. Building owners and developers are required to provide elevated links to connect between buildings.

Vertical pedestrian circulation points are to be provided within the building envelope to link the EPN to the covered walkways at the 1st storey. Unless otherwise specified, each vertical circulation point is to include a pair of two- way escalators, staircases, and two passenger lifts. Unless otherwise specified, the entire EPN and the associated vertical circulation points are to remain open at all times and be visible from the at-grade and elevated pedestrian network.

General Conditions

The pedestrian network on all levels is to be designed for universal access. GFA exemption is applicable for public spaces, covered walkways, through-block links and elevated walkways, subject to the prevailing Development Control Guidelines.

Servicing, Vehicular Access & Car Parks

All driveways and vehicular accesses are to be located away from public spaces or main pedestrian routes. This is to create a seamless and pedestrian-friendly network that is uninterrupted by vehicles.

To maintain an attractive streetscape, any above-grade car park and service areas, including refuse bin centre(s), loading / unloading bays and vehicle ingress/ egress, storage lane(s), and vehicular drop-offs/ lay-bys, etc. are to be fully integrated within the overall building form, and visually well-screened from above and on all sides. Electrical substation(s), where required, can be located at-grade but are not to front onto the main roads, pedestrian malls, or public spaces.

Sufficient holding bays for the vehicular access points to the car parks and service areas are to be provided within the development to ensure the smooth flow of vehicles along adjacent roads.

Relevant Circulars:

• Screening of Mechanical and Electrical Services and Car Parks
  

Greenery Replacement and Landscaping

To create a green and sustainable city, all new developments will be required to incorporate landscaping in the form of sky terraces and roof gardens according to the Landscape Replacement Area (LRA) requirements. For more information, please refer to the Development Control Handbook.

Works within the Road Reserves

Open Walkway

As a guide, the open walkway within the Road Reserve is safeguarded for pedestrian use. Any proposed new paving within the Road Reserve is to be finished with a warm (yellowish-beige) colour tone, natural stone looking paving material to achieve a consistent district character. The detailed design, paving pattern and choice of materials will be subject to the requirements of all relevant technical agencies.

Tree and Shrub Planting Specifications

Any new tree or shrub planting specifications for the planting verge within the adjacent Road Reserves will be subject to URA and NParks’ requirements and approval.

Connection to Commuter Facilities

For developments with commuter facilities (e.g. bus stops and taxi stands) located in front of their buildings, sheltered linkways are to be provided between the covered walkways at the 1st storey to these facilities to provide direct continuous sheltered connections.

Dedicated Cycling Routes

Certain key roads within Paya Lebar Central will be earmarked as dedicated cycling routes (please refer to the Special Detailed Control Plan: Connectivity Plan). The alignment, width and design of the cycling routes and associated street furniture are to be coordinated with URA and LTA.

Boundary Plan for Paya Lebar Central

Appendix 2

1st Storey Pedestrian Network and Activity Generating Uses

Appendix 3

Elevated Pedestrian Network