SG Logo
   
 
 
 
You are here: Home Owners & Buyers > Redeveloping Your Landed Property > Redeveloping into More House
 

Redeveloping into More Houses

 
1. What other types of landed properties can I redevelop my existing landed house to?
2. How do I know how many units of landed properties can I redevelop from my existing landed house?
3. How can I know the allowable plot ratio for my property?
4. Do I have to pay development charge?
5. What is development ceiling?
6. What is development baseline?
7. Where can I get information on the use groups and rates for development charge purpose?
8. Do I need to engage a qualified professional to apply for approval?
9. What is the application fee?
10. How do I apply for approval?
11. What happens after I submit my application?
12. When can I expect a decision?
13. What other approvals do I need to obtain?

1. What other types of landed properties can I redevelop my existing landed house to?

Under URA's current guidelines, established landed housing areas are safeguarded. Any redevelopment within these safeguarded areas must conform to the stipulated housing type.

TOP

2. How do I know how many units of landed properties can I redevelop from my existing landed house?

The number of landed properties you can redevelop from your existing property will depend on the type of landed housing and the plot size control for each property. Click here to find out the plot size control and other prevailing development control parameters.

TOP

3. How can I know the allowable plot ratio for my property?

The allowable plot ratio is stipulated in the 2008 Master Plan. However plot ratios are not stipulated for most landed property areas because the achievable gross floor area of most landed property developments is the end result of the development having complied with other development control parameters such as setback, site coverage and storey height control.

TOP

4. Do I have to pay development charge?

Whether development charge is payable or not will depend on whether the development ceiling (i.e. the proposed gross floor area of the building) is higher than the development baseline (click here for definition). The amount of development charge can only be confirmed after an application with the gross floor area data is submitted to URA for assessment.

TOP

5. What is development ceiling?

Development ceiling is the value of the development proposed for a site for which the government is prepared to allow. The Development Ceiling is computed using the following formula:

Proposed total gross floor area

X

Development Charge rate in the appropriate use group under the appropriate sector in which the development is located i.e. DC Rates Table.

Development Charge rate is the rate in the appropriate use group under the appropriate sector that the development is located in (see Q7).

 
TOP

6. What is development baseline?

The development baseline is defined in the Planning Act as the value derived from the use and intensity of the approved development on the land, for which development charge was paid, exempted, remitted or not required to be paid. [The highest value of previous approvals or Written Permissions is to be used if the site has 2 or more previous approvals]

 

For sites where the development baseline is lower than the values derived from the use and intensity prescribed for the site in the 1958 or 1980 Master Plan, the values in the historical Master Plans is safeguarded, up to the use and intensity allowed in the 2008 Master Plan. Development charge will be exempted for the difference between the safeguarded historical Master Plan value and the development baseline. You can refer to our website for more details to determine the safeguarded historical Master Plan value/baseline.

 
TOP

7. Where can I get information on the use groups and rates for development charge purpose?

Development charge rates are reviewed half-yearly, usually in March and September. The review is undertaken by the Ministry of National Development, in consultation with the Chief Valuer. Click here for the latest development charge rates.

TOP

8. Do I need to engage a qualified professional to apply for approval?

To obtain an approval from URA, you have the option to make the application yourself or to engage a qualified professional to do it for you.

After obtaining URA's approval, you will also need an approval from the Building Construction Authority (BCA). It is therefore advised that you engage a qualified professional (registered architect or engineer) to submit the application on your behalf and to follow through the entire process as they are able to apply the technical regulations better.

TOP

9. What Is the application fee?

The current application fee for reconstruction and redevelopment of landed property is as follow:

a)

Non-GCBA

 
Each unit $3,000 (subject to GST)
     
b)

GCBA

 
Each unit $4,000 (subject to GST)

TOP

10. How do I apply for approval?

Complete the EDAFORM - NEW ERECTION, accompanied with the following types of plans:

- Proposal / Sketch plans
- Road Interpretation Plan
- Drainage Interpretation Plan
- Survey Plan (for sloping and undulating sites)

You should engage a QP(Qualified Person) to submit the application electronically through the Internet by using our Electronic Development Application system EDA.

Alternatively, your QP may lodge the plans electronically using the Plan Lodgment Scheme for new erection / reconstruction of 1 landed house if the necessary criteria are met. Under this scheme, approval from URA is not required. Once the plans are lodged, the proposal is deemed approved.

TOP

11. What happens after I submit my application?

We will evaluate every accepted application based on the prevailing development control parameters.

 

A Written Permission (WP) with a 2-year validity period is issued if the application complies with all the parameters. Construction works must complete within the validity period. Otherwise you have to renew your WP. The current fee for extension of WP is $500 (subject to GST).

 

A Provisional Permission (PP) with a 6-month validity period is issued when there are certain conditions which you must follow up on. You need to make a resubmission to obtain WP within the 6 months. Otherwise you have to apply to extend the PP. The current fee for extension of PP is $200 (subject to GST).

 

If the application cannot be allowed, we will issue a Refusal of Written Permission (RWP) with reasons given. If you wish to appeal for a review, you can do so by submitting an Appeal form to the Minister of National Development within 60 days from the date of the RWP.

TOP

12. When can I expect a decision?

You can expect a decision within 4 weeks for your electronic submission.

TOP

13. What other approvals do I need to obtain?

Besides obtaining approval from URA, you should also find out more about the other regulations from these following agencies:

- BCA on matters concerning structural integrity, lighting, ventilation, etc.
- LTA on matters concerning repositioning of access and widening of roads
- ENV on matters concerning sewerage and drainage
- NParks on the felling of trees if your property is within the Tree Conservation Area

TOP
 
I Want to..
 
-
Contact Customer Service Officer
 
-
Make Consultation on Development Control Matters
 
-
View lodgeable area plan
 
-
View landed housing area plan
 
-
View exemption list
 
-
View development charge sector map & rates
 
-
Search Planning Records
 
-
Apply Outline Planning Permission
 
-
Submit Minor Development Application
 
-
Search Private Residential Property Transactions
Privacy Statement | Conditions of Access | Site Requirements Copyright 2010, Urban Redevelopment Authority. All rights reserved.